SHANGHAI MICROCRE OPTICS-MECH TECH CO.,LTDSHANGHAI MICROCRE OPTICS-MECH TECH CO.,LTD

400-8127-833shanghai@yr17.netNo.1478 Nanfeng Highway, Fengcheng Town, Fengxian District, Shanghai 201411, Chinawww.yr17.net

Updated 2026-11-12 · Model AXQ-2Q

Metallographic Preparation

PREMIUMBUILDMICROCREModel AXQ-2QAlso available as a premium build: higher accuracy and calibration standard

Fully Automatic Metallographic Sample Mounting Press AXQ-2Q

Updated 2026-11-12Category Metallographic Preparation

ModelAXQ-2Q

CategoryMetallographic Preparation

CustomizationCustom builds supported

Get Quote & Selection Advice Generate a measurement plan

400-8127-833 Generate proposal

Genuine Product

Nationwide Shipping

1-Year Warranty

VAT Invoice Available

Overview

No translation available yet — Chinese original below Full description (Chinese original) ↓

Page summary:Fully Automatic Metallographic Sample Mounting Press AXQ-2Q is a Metallographic Preparation product (model AXQ-2Q), manufactured by Shanghai Microcre Optics-Mech Tech Co., Ltd. Key specifications: Model = AXQ-2Q; Optional = 气泵 OPTIONAL; Temperature control = Automatic; Specimen specification = Φ25mm/Φ30mm/Φ40mm（选一）; Control System = 智能温度、时间控制表; 加热器规格 = 800W. Contact: 400-8127-833 / shanghai@yr17.net.

For detailed datasheets in English, please contact our sales engineers.

AXQ-2Q Specifications

Structure & travel3

Stage, travel, dimensions and weight — siting and fixturing

Specimen specification: Φ25mm/Φ30mm/Φ40mm（选一）
Overall Dimensions: 350 × 300 × 400mm (L × W × H)
Net Weight: 15KG

Loading & control1

Loading mode, speed, dwell and software interfaces

Control System: 智能温度、时间控制表

Power & environment4

Power, consumption and ambient requirements

Temperature control: Automatic
Temperature range: Room temperature -210℃
Air supply air pressure: 0.5 – 0.7兆帕
Control power supply: 220V

Accessories & configuration2

Standard, optional and supplied-with items

Optional: 气泵 OPTIONAL
Main Unit: 一台

Other1

Additional notes

加热器规格: 800W

Specifications vary with configuration — confirm the final technical agreement with our engineer. Optional items are priced separately.

Optional	气泵 OPTIONAL
Temperature control	Automatic
Specimen specification	Φ25mm/Φ30mm/Φ40mm（选一）
Control System	智能温度、时间控制表
加热器规格	800W
Temperature range	Room temperature -210℃
Air supply air pressure	0.5-0.7 兆帕
Control power supply	220V
Overall Dimensions	350 × 300 × 400mm (L × W × H)
Net Weight	15KG
Main Unit	一台

Some specification values are given in the original Chinese wording; ask our engineers for an English datasheet.

Full description (Chinese original)

The English text on this page summarises the model and specifications. The full technical description is the Chinese original below; an English datasheet is available from our engineers on request.

AXQ-2Q 全自动金相试样镶嵌机一、产品简介： AXQ-2Q 型全自动金相试样镶嵌机 ( 是气动加压镶嵌机 ) 是既 BXQ-2之后又一新产品.它适用于对不是整形、不易手拿的微小金相试样进行热固性塑料压制.成形后可方便地进行试样磨抛操作,也有利于在金相显微镜下进行显微组织测定.本镶嵌机更比原BXQ-2型镶嵌机拥有更高科技含量的全套控制以及时间设定系统,更能适应这个不断进步与开发中的时代. 二、结构特征 : 本机系机械式镶嵌机 ,用气动升降,使压制试样的下模在钢模套内上下移动,热固性塑料连同镶嵌的试样在加热的条件下成形.试样制备过程中的成形压力由气缸直接加压。本机配有智能型数字显示温控器 ,能自动控温,设定温度与实测温度均有显示,温度传感器采用热电偶.本机具有高灵敏度、高精度,有温度显示,易观察又易操作等优点.每件试样镶嵌（黑色镶嵌料）约 1 0 分钟 .本机更比原BXQ-2型拥有更高科技含量的全套控制以及时间设定系统. 三、使用环境 1.海拔高度不超过1000米； 2.周围介质温度不高于+40oC,及不低于-10oC； 3.空气在相对湿度不大于85%（在20oC时）； 4.周围没有导电尘埃、爆炸性气体、及能严重破坏金属和绝缘的腐蚀性气体 5.没有明显的振动和颠簸四、技术参数：

Applicable standards

本机型的设计与验收依据下列标准；采购文件引用时请注明版本年份。

GB/T 13298Inspection methods for microstructure of metallic materials试验方法 GB/T 6394Determination of estimating the average grain size of metal试验方法 GB/T 10561Steel — Determination of content of nonmetallic inclusions — Micrographic method试验方法 GB/T 11354Determination of nitrided case depth and metallographic examination试验方法

查看完整标准库 →

Selection FAQ

Can the configuration of AXQ-2Q be adapted to my application?

Yes. Beyond the standard configuration, measuring range, fixtures, optics and software functions can be adapted. Send your sample and test requirements and our engineers will return a configuration list and quotation.

Can I test my samples before ordering?

Yes. Samples can be mailed to our Shanghai Fengxian laboratory for free testing with a written report, or you can book an on-site demonstration to confirm the workflow and data format.

How are lead time, installation and after-sales service handled?

Standard configurations usually ship within 15-30 working days, including first installation, commissioning and operator training. The instrument carries a one-year warranty and software upgrades are free for life.

General information only — final configuration and applicable conditions are subject to the mutually confirmed technical document.

After-Sale & Selection Support

Sample Testing

Free testing of mailed samples
Factory demo by appointment
Written test proposal provided

Delivery & Training

Free first installation & commissioning
On-site operation training
One-year full warranty

Custom Builds

Fixtures, ranges and software customizable
Automation line integration
Lifetime free software upgrades