SHANGHAI MICROCRE OPTICS-MECH TECH CO.,LTDSHANGHAI MICROCRE OPTICS-MECH TECH CO.,LTD
TECHNICAL PROPOSAL
产品技术方案书
No.:YR-P261112-0716
Date:2026-11-12
Valid 30 days
Microscopes
MMAS-21 Integrated Circuit Metallurgical Microscope Analysis System
Model MMAS-21 · MICROCRE
In one sentence: for the your team project we recommend the MMAS-21, delivered as main unit + standard accessories + first training, 15–30 working days for standard configuration.
ModelMMAS-21
CategoryMicroscopes
Standard lead time15–30 working days
WarrantyOne year, whole machine
The short version · Three things to know before the datasheet
What it doesFor measurement and inspection of Microscopes, producing traceable records instead of visual checks and manual calculation.
Who it fitsIncoming inspection, lab sampling, process validation and final inspection — the larger the batch and the tighter the tolerance, the bigger the gain.
Not the right fit ifIf you only need a one-off rough check, or your parts exceed this model’s range — in both cases we will propose a cheaper route.
| Customer | — |
Contact | — |
|---|
| Tel | — |
Project | — |
|---|
| Qty | 1 |
Requirements | Configured around your samples and test items, meeting repeatability and data-traceability requirements for batch inspection. |
|---|
In this proposal
P2 Requirement & system layout
P3 Specifications, explained
P4 Scope of supply & workflow
P5 Delivery, service & commercial
· Standards and signature page
About us
Founded in 2005, Shanghai Microcre Optics-Mech Tech Co., Ltd. designs and manufactures material testing and dimensional metrology instruments: hardness testers, metallographic preparation, autocollimators, testing machines and extreme-environment systems across nine product lines with 1,000+ models. National High-Tech Enterprise and Shanghai SME Specialist, ISO 9001:2015 certified, with 60+ intellectual property rights.
Each model is available in a standard and a premium build; one-year warranty with seven regional service centres.
SHANGHAI MICROCRE OPTICS-MECH TECH CO.,LTD · 400-8127-833 · shanghai@yr17.netYR-P261112-0716
SHANGHAI MICROCRE OPTICS-MECH TECH CO.,LTDTECHNICAL PROPOSAL
MMAS-21
2026-11-12
1. Your requirement
The goal is accurate, fast and traceable measurement. This proposal is built around those three: the machine secures accuracy, the accessories secure fixturing and throughput, the software secures traceability.
Taking the MMAS-21 as an example, configuration in section 5; if sample size or batch differs from the description, fixtures and range are adjusted at the technical-protocol stage without changing the base model.
2. How the system is built
Optics & imagingObjectives, eyepieces, illumination and field of view
Loading & controlLoading mode, speed, dwell and software interfaces
Modules listed reflect this model’s actual configuration; an omitted group means it does not apply, not that it was left out.
3. Why this model
- Model and configuration follow the actual test object — no one-size-fits-all recommendation.
- Each model comes in a premium and a standard build, so budget and accuracy can be discussed separately.
- Factory installation, commissioning and training — producing reports from day one; automation or data interfaces can be added later without replacing the machine.
- A premium build of the same model is available: tighter assembly tolerances, upgraded components and higher-grade factory calibration, suited to metrology institutes and research acceptance.
Before you sign: what the price includes — and what it does not
This section is written before signing so that nothing turns up missing on delivery day. It follows the standard configuration; special requirements can be listed separately in the technical agreement.
Included
- Main unit plus factory standard accessories (see Section 5)
- Factory inspection report, certificate, packing list, operation and maintenance manual
- First installation, commissioning and operation training (remote or on site, travel included)
- One-year warranty on the whole unit; free upgrades within the same software version for life
- Domestic transport and transit insurance (up to unloading at your plant)
Not included (quoted separately)
- Special fixtures, custom tooling and modifications beyond the standard range
- Third-party metrology verification or calibration (if a CNAS certificate is required)
- On-site power modification, foundation, compressed air, temperature and humidity control
- Consumables (indenters, cutting wheels, polishing cloths, reference blocks)
- Out-of-warranty on-site service and spare parts
SHANGHAI MICROCRE OPTICS-MECH TECH CO.,LTD · 400-8127-833 · shanghai@yr17.netYR-P261112-0716
SHANGHAI MICROCRE OPTICS-MECH TECH CO.,LTDTECHNICAL PROPOSAL
MMAS-21
2026-11-12
4. Specifications
| Model | MMAS-21 |
|---|
| Optical system | Infinity-corrected optical system |
|---|
| Eyepiece | 超大视野目镜 EW10X/25，镜筒 φ30 配合 |
|---|
| Objectives | 5X、10X、20X、50X、100X 明暗场物镜；40X、100X 无穷远平场物镜 |
|---|
| Observation head | 铰链式可倾角度三目观察镜筒，0-35 度倾斜，瞳距 47-78mm，目镜接口 φ30，固定视度 |
|---|
| Reflected illumination | BF1（防止切换时太亮），BF2，DF 三个模块；标准柯拉照明，12V100W 卤素灯；起偏镜、检偏镜（选配）；起偏、检偏同步连接板（选配）；蓝、绿、黄滤色片和磨砂玻璃 |
|---|
| Transmitted illumination system | 具有扩展 12V100W 电源输出接口（可做落射光源）；标准柯拉照明，12V100W 卤素灯；ND25、ND6 |
|---|
| Condenser | 长距聚光镜：NA0.65、WD10.2，可调中机构，双侧聚光镜升降手柄 |
|---|
| Focusing system | 粗微动同轴调焦，左右微动手轮互换机构；左手具有高度限位功能；右手具有粗动松紧调整功能；微动 0.001mm/ 格，0.1mm/ 圈；粗动 37.7mm/ 圈；升降范围 35mm；样本空间 56mm（平台托架换至最低档位） |
|---|
| Nosepiece | 六孔转换器（扩展插槽），燕尾接口，W26*0.706 |
|---|
| Stage | 移动范围 4″ *4″ (102*102)；采用硬质氧化表面，防磨损；Y 向可锁紧；尺寸 :210(X)*170(Y)mm；压平机；（选配）；摄像附件；标准 C 型接口 1X，0.5X，0.7X（选配） |
|---|
| Software | MMAS 金相分析处理系统；ECO 功能；无操作者 15min 后自动关闭光影 |
|---|
Three things to check before you compare
- The scale matters more than the number. If the drawing says HRC, measure HRC; if HV, measure Vickers. Converted values are for reference only.
- Range is not accuracy. Range tells you what fits; error and repeatability tell you how accurate it is — read both columns together.
- Acceptance is proven on your samples, not on the brochure. Provide 3–5 real workpieces for an on-site repeatability test; sign once the numbers match.
If you need a benchmark against your current or an imported instrument, we can run the same samples and issue the data.
SHANGHAI MICROCRE OPTICS-MECH TECH CO.,LTD · 400-8127-833 · shanghai@yr17.netYR-P261112-0716
SHANGHAI MICROCRE OPTICS-MECH TECH CO.,LTDTECHNICAL PROPOSAL
MMAS-21
2026-11-12
5. Scope of supply
- Main unit, tool kit and manual
- Factory calibration certificate and conformity certificate
- Power cable and standard accessories
- First installation, commissioning and operator training
Consumables and spares are quoted separately by annual usage; for the first order we recommend one set of wear parts to avoid downtime.
6. Inspection workflow
01Sample prep: prepare specimens to the standard, record IDs and ambient conditions
02Fixturing and setup: select the program, confirm load, range and scale
03Measure and verify: consecutive measurements with out-of-tolerance alerts and re-test when needed
04Reporting: export data with calibration status and measurement uncertainty
7. Applicable standards
- GB/T 13298 Inspection methods for microstructure of metallic materials
- GB/T 6394 Determination of estimating the average grain size of metal
- GB/T 10561 Steel — Determination of content of nonmetallic inclusions — Micrographic method
- JB/T 9324 Metallurgical microscopes
- GB/T 2985 Biological microscopes
- GB/T 22058 Microscopes — Stereomicroscopes — Information provided to the user
SHANGHAI MICROCRE OPTICS-MECH TECH CO.,LTD · 400-8127-833 · shanghai@yr17.netYR-P261112-0716
SHANGHAI MICROCRE OPTICS-MECH TECH CO.,LTDTECHNICAL PROPOSAL
MMAS-21
2026-11-12
8. Delivery and implementation
| Stage | Scope | Duration |
|---|
| Technical review | Confirm samples, range, fixtures and acceptance criteria; sign the technical protocol | 3–5 days |
| Production and calibration | Assembly, burn-in, factory calibration with data report | 15–30 days |
| Delivery and installation | Crated shipment; unpacking, positioning and commissioning on site | 3–7 days |
| Training and acceptance | Operation and maintenance training; acceptance test with standard samples | 1–2 days |
9. Acceptance and training
- Acceptance basis: the signed technical protocol plus the standards in section 7
- Acceptance samples: please provide 3–5 real workpieces for an on-site repeatability test
- Training goal: the inspector can fixture, measure and issue a report independently
- Documents: manual, conformity certificate, calibration certificate, packing list
10. Service
- One-year machine warranty; replacement for quality issues
- First on-site installation and travel free of charge
- Technical hotline on working days; on-site visit by appointment
- Free lifetime upgrades within the same software version
- Optional automated loading, data interfaces and LIMS/MES integration
- Common spares and consumables kept in stock to shorten downtime
11. Commercial terms
| Price | Quoted on configuration (tax and domestic freight included) |
|---|
| Payment | 30% deposit, 70% before shipment |
|---|
| Lead time | 15–30 working days for standard configuration |
|---|
Customer (signature & stamp)
Date:
Supplier (signature & stamp)
Date:
This proposal is a technical recommendation. Final scope, acceptance criteria and price are subject to the signed technical agreement.
SHANGHAI MICROCRE OPTICS-MECH TECH CO.,LTD · 400-8127-833 · shanghai@yr17.netYR-P261112-0716
